Fenimore Book 258 INLINE, Self-Timing, Book punch

Description

This Fennimore 258 an INLINE, and SELF-TIMED, punch that
can go with ANY of your equipment with little setup. Roll it up, and
start punching right straight away.
Comes with 1 Die, but we have many in stock, can offer you a good price on a 2nd, 3rd dies if you want additional.
You can Face Trim with this unit, or you can take a 3/16" Gutter from between 2 books.
maximum OVERALL size is approximately 9" x 12" going IN to the unit with 9" leading,
making for 2 booklets (approx) 5.913" x 9" at its maximum individual book size.
In other words, IF you can bind a 9x12 Book, this could knife them to just under 6" x 9"
HOWEVER your staples would be on the SHORT edge. Making it a Landscape in this example.
If you desire for a simple FACE TRIM, this will timeout up to whatever you have FEEDING the unit,
and it will take a 3/16" trim, HOWEVER, if you want more trim, additional die can be made, or it is possible
that the additional trim will follow into the trash recepticle. Please enquire we can custom modify to your needs.
It self-times to any machine, and only cycles when a piece is presented.
Please write and tell us any special specifications.
Book size
:
minimum
5.5” x 8.5”   (140mm x 216mm)
maximum
9” x 11.75” (229mm x 297mm)
Book thickness
:
Maximum
1/8” (3.2mm)
(We have successful modified these machines to punch THICKER,
I know we have gone as thick
as 1/4" or 6.4mm) Please inquire.
Operating Speed:
7,000 cycles per hour
Electrical:
1/2 Hp 230 volt/60hz/3-phase (
other voltages priced on request)
Weight:
850 lbs.