Mauser 98-3 Position Safety

Description

Mauser 98 – 3 Position Safety
Part # 983R
A new machined sleeve from Chrome Moly Steel. This safety has the side swing lever like the Classic Winchester M70. A Precision machined unit that is left polished in the white for final finishing. The sleeve has been machined from pre heat treated steel, while the lever has been carefully heat treated and tempered for long life. This allows for low scope use, while retaining the gas deflecting design and shape of the Mauser sleeve. It will upgrade the Mauser 98 and many of its various variations. This Safety will
not
fit the models 1891, 1893 1894, 1895, 1896, Siamese Mauser, or the Husqvarna Improved Mauser
Positive detents in the lever for the FIRE (forward) safe (middle) positions. The middle position is safe, while allowing the bolt to be opened and the rifle unloaded. Moving the lever all the way to the rear position, (safe) forces the plunger forward which locks the bolt from opening, and puts the lever in the rear SAFE position.
This safety uses the original firing pin, firing pin spring, and cocking piece as well as the old sleeve lock, and spring.
Requires installation by a qualified person, minor machining work is required to the rear of the bolt and the cocking piece for proper installation. Detailed fitting instructions are included with each safety.
A spare safety plunger, safety plunger spring, and cross pin are supplied.
This Safety is 100% made in the USA, from USA sourced steel.
No International sales.