Vintage Rolodex P-500 - Heavy Duty - Paper Hole (5 Pins) Puncher- Adjustable

Description

Vintage Rolodex Paper Hole Puncher - Model P-500  (5 punch pins are in the hole punch).  (P-819 is stamped on the bottom of the lever, and the Model # P-500 is stamped on the bottom of the base)
Pins can be relocated from the standard setting so that you get a custom punch.  Up to 5 punches can be made at one time.
The hole punch is made from a heavy metal with original black (factory) paint.  The hole punch has not had any touch-ups.  Very nice condition and would look great in any office.
There are 5 (original) pins included with the sale.  Move them around as desired.  They lift very easily to be reset from the standard 3-hole punch setting.
There is a well marked paper guide that sets the paper in place -- noting 8.5", 11" and 17" paper - plus other paper sizes.  Very easy to use.
The pins are also well marked - to help you eliminate inaccurate hole punchings.  There are 5 pins -- so 5 holes can be punched in sheets of paper if desired.  Lift the pins from their current setting, and reset them as desired.
There are rubber feet on the corners of the base to protect desk or counter top surfaces. One of the rubber feet are different from the other 3, but all four mini pads are rubber.
The bottom of the  hole punch as an aluminum chamber to catch the paper punches.  It opens easily to clean -- press the tab that notes "Press" and shake out the punches that have been captured - when held over a waste basket or when inside a bag to eliminate having hole punches on the desktop or floor.
The base is 11.25" long,  6.25" wide, and the height when the hole punch lever is not depressed is apx 6.25" tall.  The hole punch weighs:  5 lb 3.4 oz
The hole punch will be wrapped and double boxed to make sure that it arrives in the same condition as when it left here.
Shipping will be USPS Regional Rate (insured, and one of the Priority Mail types of shipping).
Please see all pictures and contact me if you have questions